LOGO23 scaled

What are stainless steel 15-5ph Round Bars & Rods?

There are many types of stainless steel round bars made with 15-5ph stainless steel, which are variations of 17-4 chrome nickel copper precipitation hardening steel. It has high strength and good corrosion resistance. A leading manufacturer of 15-5 Ph Rod products in different dimensions, Micro Metals is one of the leading suppliers and manufacturers of this type of stainless steel alloy. Fasteners, fittings, gears, aircraft parts, and high pressure, corrosion-prone parts are all made from these materials. Valves made up of the AMS 5659 15-5PH Flat Bar are common in engine parts and in other applications as well.

It is important to note that the reduced delta ferrite in the bars ensures that the toughness is increased. There are different conditions for different bars, such as H900, H1025, and H1075. Each of these has a different yield and tensile strength. DIN 1.4545 Hex Bars have yield strength ranging from 75 to 170 ksi while the minimum tensile strength varies from 115 to 190 ksi depending on the conditions in which they are used.

Stainless Steel 15-5ph

What are stainless steel 17-4ph Round Bars & Rods?

A stainless steel alloy that is crafted from the elements of chrome, nickel, and copper is called 17-4PH. It is a hardening austenitic stainless steel grade that offers oxidation resistance and corrosion resistance along with high strength and hardness. Stainless steels of this grade are mainly precipitation hardened.

When it is solution annealed, 17-4PH is a corrosion-resistant grade, but it can be soft, ductile, or medium to high strength. By applying the appropriate ageing treatment, you can obtain good toughness and strength. A martensitic precipitation hardening stainless is characterized by a high tensile strength and high yield strength obtained by solution annealing followed by a low temperature age hardening treatment, and a single or two low temperature heat hardening treatment. The corrosion properties of 17-4PH stainless steel are comparable to those of 304 austenitic stainless steel in many environments.

Stainless Steel 17-4ph

What is the difference between 15-5 ph vs 17-4 ph?

In terms of chemical composition, grades 15-5 P and 17-4 P differ fundamentally. There are many differences between grades 15-5 P and 17-4 P. 15-5 P has a very high content of iron, whereas 17-4 P has a very small amount of iron in order to provide stability and strength to the grade. Due to its extreme solidity, 15-5Ph is also known as a martensitic stainless steel. steel, whereas 17-4 Ph is known for cementing martensitic stainless steel. The 15-5 grade is noticeably more potent than the 17-4 Ph.