Inconel 601 Round Bar Rod
Table of Content
-
Product Specification
-
Chemical Composition
-
Mechanical Composition
-
Equivalent Grade
Inconel Alloy 601 Forged Round Bar, Astm B166 601 Inconel Rods, 601 Inconel Square Bars, Inconel Din 2.4851 Round Bars Supplier,Inconel Uns N06601 Hexagon Bars, 601 Inconel Rectangle Bar, Alloy 601 Bright Bars Supplier In India.
Bright finish 601 Inconel Alloy Bar Stock, supplier of Inconel Alloy 601 Hollow Bar, importer of Inconel Werkstoff Nr. 2.4851 Round Rod in India, Alloy 601 Inconel Cold Drawn Bar manufacturers, Check Inconel 6601 Hexagon Bar Price List
DETAILED INFORMATION
Inconel 601 Round Bar Rod is available from Purohit Pipe Industries, also referred to as nickel alloy 601 bars. These are composed of 58-63% nickel content. Inconel is a general-purpose nickel-chromium iron alloy. As an engineering alloy, 601 is the best choice for applications that require heat and corrosion resistance. Due to its unmatched quality, most industrialists use these round bars under adverse conditions. Under impact loadings, Inconel is unbreakable.
A variety of quality assurance tests are conducted, including hardness tests, mechanical tests, PMI tests, pitting corrosion tests, destructive and non-destructive tests, radiographic tests, and visual inspection tests. The third party inspection approved the quality of products. Further, the manufacturers provide documentation reports that include invoices, packing details, raw material test reports, certificates by the manufacturers, fumigation reports, and guarantee letters.
A variety of quality assurance tests are conducted, including hardness tests, mechanical tests, PMI tests, pitting corrosion tests, destructive-non-destructive tests, radiographic tests, and visual inspection tests. The third party inspection approved the quality of the products. In addition, manufacturers provide documentation reports, including product invoices, packing details, raw material test reports, certificates from manufacturers, fumigation reports, and warranty letters.
There is standard packaging for the fabricated product. In addition to the company logo, registered trademark number, batch code, lot number, and packaging information, Inconel 601 Round Bar Rods come packaged in plastic packaging for long-term engineering applications.
CITIES WE DELIVER
Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam, Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar, Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh
Inconel 601 Round Bar Rod Specification
Inconel 601 Forged Bar and UNS N06601 Threaded Bar with polishing and cut to length
Inconel 601 Material Specification: ASTM B166/ ASME SB166 Inco 601 Round Bar
Grade: Inconel 600 (UNS N06600, Alloy 600, 2.4816), Inconel 601 (UNS N06601, Alloy 601, 2.4851), ASTM B166 Inconel 625 (UNS N06625, Alloy 625, 2.4856), Inconel 800 (UNS N08800, Alloy 800, 1.4876)
Form: Round, Square, Hex (A/F), Bush, Rectangle, Flat, Billet, Ingot, Forging, PSQ Bar, Wire Rod, Wire (Coil Form), Wire-mesh etc.
Size Range: 15NB to 150NB In manufacturing process: Cold drawn/ Extruded
Length: 100 mm To 3000 mm Long & Above
Diameter (Size) : Metric M6 to M48, Inches – 1/4’’ to 2’’
Tolerance : H8, H9, H10, H11, H12, H13, K9, K10, K11, K12 or as per clients’ requirements
Finish : Cold Drawn, Shot Blast & Drawn, 240 Grit Belt Polished, Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish, High Polished
Condition : Cold Drawnd Polished Cold Drawn Centreless Ground & Polished, Threading
Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
Inconel 601 Round Bar Rod Chemical Composition
Element | Inconel 601 |
C | 0.10 max |
Mn | 1.0 max |
Ni | 58.0 – 63.0 |
S | 0.015 max |
Si | 0.5 max |
Cu | 1.0 max |
Cr | 21.0 – 25.0 |
Fe | Balance |
Inconel 601 Round Bar Rod Mechanical Properties
Element | Inconel 601 |
Density | 8.1 g/cm3 |
Melting Point | 1411 °C (2571 °F) |
Yield Strength (0.2%Offset) | Psi – 30,000 , MPa – 205 |
Tensile Strength | Psi – 80,000 , MPa – 550 |
Hardness (Brinell) | – |
Elongation | 30 % |
Equivalent Grades For Inconel 601 Round Bar Rod
STANDARD | UNS | WERKSTOFF NR. | JIS | BS | GOST | AFNOR | EN |
Inconel 601 | N06601 | 2.4851 | NCF 601 | NA 49 | XH60BT | NC23FeA | NiCr23Fe |
Inconel 601 Round Bar Rod Size Chart
Inconel 601 Round bar Type |
SIZES (mm) |
SIZES (Inches) |
ISO Tolerance |
Alloy 601 Cold Drawn and Polish Round Bar |
3.00 – 75.00 |
1/8″ – 3.00″ |
h8-h9-h10-h11 |
Nickel Alloy 601 Cold Drawn and Ground Bar |
10.00 – 75.00 |
5/6″ – 2.50″ |
h8-h9-h10-h11 |
UNS N06601 Peeled and Polished Round Bar |
40.00 – 150.00 |
1.50″ – 6.00″ |
h11, h11-DIN 1013 |
Inconel 601 Peeled and Ground Bar |
20.00 – 50.00 |
3/4″ – 2.00″ |
h9-h10-h11 |
2.4851 Inconel 601 Round Bar Length
- USA : 40 feet
- Metric system: standard length is 9 – 12 metres
Weight Chart Of Inconel 601 Round Bar Rod
Inconel 601 Round bar |
||||||||
Size |
Kgs / Foot |
Kgs / Mtr |
Size |
Kgs / Foot |
Kgs / Mtr |
Size |
Kgs / Foot |
Kgs / Mtr |
3mm |
0.017 |
0.055 |
20mm |
0.753 |
2.470 |
3″ |
10.900 |
35.762 |
1/8″ |
0.019 |
0.062 |
22mm |
0.908 |
2.979 |
3-1/4″ |
12.800 |
41.996 |
5/32″ |
0.029 |
0.095 |
7/8″ |
0.926 |
3.038 |
3-1/2″ |
14.850 |
48.772 |
4mm |
0.030 |
0.098 |
24mm |
1.080 |
3.543 |
3-3/4″ |
17.001 |
55.780 |
3/16″ |
0.043 |
0.141 |
25mm |
1.180 |
3.871 |
4″ |
19.306 |
63.340 |
5mm |
0.047 |
0.154 |
1″ |
1.210 |
3.970 |
4-1/4″ |
21.908 |
72.249 |
7/32″ |
0.058 |
0.190 |
26mm |
1.271 |
4.170 |
4-1/2″ |
24.4487 |
80.340 |
6mm |
0.068 |
0.223 |
27mm |
1.368 |
4.490 |
4-3/4″ |
27.366 |
90.249 |
1/4″ |
0.076 |
0.249 |
1-1/8″ |
1.534 |
5.033 |
5″ |
30.461 |
99.940 |
7mm |
0.091 |
0.298 |
30mm |
1.691 |
5.548 |
5-1/2″ |
36.690 |
121.000 |
5/16″ |
0.118 |
0.387 |
1-1/4″ |
1.924 |
6.349 |
6″ |
43.860 |
143.900 |
8mm |
0.120 |
0.398 |
32mm |
1.894 |
6.314 |
6-1/2″ |
51.093 |
167.630 |
9mm |
0.152 |
0.498 |
1-3/8″ |
2.303 |
7.550 |
7″ |
59.432 |
196.000 |
3/8″ |
0.170 |
0.557 |
35mm |
2.390 |
7.553 |
7-1/2″ |
68.226 |
225.000 |
10mm |
0.189 |
0.620 |
36mm |
2.438 |
7.999 |
8″ |
77.586 |
254.55 |
11mm |
0.228 |
0.748 |
38mm |
2.792 |
8.903 |
10″ |
121.048 |
397.140 |
7/16″ |
0.232 |
0.761 |
1-1/2″ |
2.715 |
8.951 |
|||
12mm |
0.271 |
0.889 |
40mm |
3.009 |
9.872 |
|||
1/2″ |
0.303 |
0.994 |
1-5/8″ |
3.200 |
10.449 |
|||
13mm |
0.318 |
1.043 |
1-3/4″ |
3.712 |
12.179 |
|||
14mm |
0.368 |
1.207 |
45mm |
3.807 |
12.555 |
|||
9/16″ |
0.383 |
1.256 |
1-7/8″ |
4.260 |
13.977 |
|||
15mm |
0.424 |
1.391 |
48mm |
4.330 |
14.205 |
|||
5/8″ |
0.473 |
1.551 |
50mm |
4.698 |
15.414 |
|||
16mm |
0.481 |
1.578 |
2″ |
4.848 |
15.906 |
|||
17mm |
0.543 |
1.791 |
2-1/8″ |
5.475 |
17.963 |
|||
11/16″ |
0.573 |
1.880 |
2-1/4″ |
6.135 |
20.128 |
|||
18mm |
0.610 |
2.001 |
60mm |
6.768 |
22.205 |
|||
3/4″ |
0.682 |
2.237 |
2-3/8″ |
6.838 |
22.435 |
|||
2-1/2″ |
7.576 |
24.856 |
||||||
2-5/8″ |
8.354 |
27.409 |
||||||
2-3/4″ |
9.169 |
30.083 |
Stock List Of (AMS 5715) Inconel 601® / Nickel Alloy 601 Bar
Alloy |
Product form |
Dimension |
ALLOY 601 (61Ni/23Cr/1.5Al) |
Rod; annealed, centerless ground h9 |
Dia=6.0 mm, Weight=0.234 kg/m |
ALLOY 601 (61Ni/23Cr/1.5Al) |
Rod; annealed, centerless ground |
Dia=10.0 mm, Weight=0.7 kg/m |
ALLOY 601 (61Ni/23Cr/1.5Al) |
Rod; annealed, peeled k12 |
Dia=20.0 mm, Weight=2.55 kg/m |
ALLOY 601 (61Ni/23Cr/1.5Al) |
Rod; hot rolled, annealed, peeled |
Dia=25.0 mm, Weight=4.1 kg/m |
ALLOY 601 (61Ni/23Cr/1.5Al) |
Rod; pickled, solution treated |
Dia=35.0 mm, Weight=8.2 kg/m |
ALLOY 601 (61Ni/23Cr/1.5Al) |
Rod; hot rolled, annealed, peeled, k12 |
Dia=40.0 mm, Weight=10.4 kg/m |
ALLOY 601 (61Ni/23Cr/1.5Al) |
Rod; peeled, solution annealed |
Dia=50.0 mm, Weight=16.0 kg/m |
Tolerances Of 601 Inconel Alloy Round Bar
Cold Drawn WERKSTOFF NR. 2.4851 Round Bar Tolerance & Steel Hexagon, Flat Tolerance (BS 970-3)
Tolerances for Cold Drawn ASTM B166 601 Inconel Round Bar | ||
Shape / Section | Size, diameter or width across flats | Permitted variation |
mm | mm | |
Round | ≥6 ≦ 18> 18 ≦ 30> 30 ≦ 50> 50 ≦ 80> 80 ≦ 100 | + 0 to – 0.070+ 0 to – 0.085+ 0 to – 0.100+ 0 to – 0.120+ 0 to – 0.140 |
Flat (thickness) | < 18> 18 ≦ 30> 30 ≦ 50> 50 ≦ 80 | + 0 to – 0.110+ 0 to – 0.130+ 0 to – 0.250+ 0 to – 0.350 |
Flat (width) | < 18> 18 ≦ 30> 30 ≦ 50> 50 ≦ 80> 80 ≦ 100> 100 ≦ 130> 130 ≦ 160> 160 ≦ 320 | + 0 to – 0.110+ 0 to – 0.130+ 0 to – 0.160+ 0 to – 0.190+ 0 to – 0.220+ 0 to – 0.350+ 0 to – 1.00+ 1.00 to – 1.00 |
Square andhexagon | ≥ 6 ≦ 18> 18 ≦ 30> 30 ≦ 50> 50 ≦ 80> 80 ≦ 105 | + 0 to – 0.090+ 0 to – 0.110+ 0 to – 0.130+ 0 to – 0.160+ 0 to – 0.250 |
Tolerances of Turned 601 Inconel Alloy Round Bar (BS 970-3)
Turned Inconel 601 Round Bar Tolerances | |
Inconel 601 Round Bar Size, diameter | Permitted variation |
mm | mm |
≧ 6 ≦ 18> 18 ≦ 30> 30 ≦ 50> 50 ≦ 80> 80 ≦ 120> 120 ≦ 180> 180 ≦ 250> 250 ≦ 315> 315 ≦ 400> 400 | + 0 to – 0.070+ 0 to – 0.085+ 0 to – 0.100+ 0 to – 0.120+ 0 to – 0.140+ 0 to – 0.160+ 0 to – 0.185+ 0 to – 0.210+ 0 to – 0.230+ 0 to – 0.250 |
Tolerances of Precision UNS N06601 Inconel Round Bar (BS 970-3)
Precision 2.4851 Inconel 601 Round Bar Tolerances | ||||
Section | Size,diameter | Permitted overall variation | ||
Class A | Class B | Class C | ||
mm | mm | mm | mm | |
Round | ≧ 6 <75 | 0.05 | 0.025 | 0.013 |
Markings On The Inconel 601 Round Bar Rod
The full identification of the bars should be continuously marked down its whole length, including :
- Rating Designation
- Material Designation
- “WP” in grade symbol
- Grade
- Schedule number or nominal wall thickness
- Heat Code
- Manufacturer’s Name or Symbol
Inconel 601 Round Bar Rod Application Industries
- Petrochemical Industry
- Chemical Industry
- Oil and Gas Industry
- Pulp & Paper Industry
- Power Plant Industry
- Food Processing Industry
- Pharmaceuticals Industry
- Energy Industry
- Aerospace Industry
Talk With Experts
Or Send a Message
+919769256593
Distribution Network

Our Product
Our Latest Blogs
The Difference Between Forged Flanges and Cast Flanges
We have talked commonly about forged steel flanges, forged tube, what is forged metal, casting flange, what causes cast, casting porosity, cast trunion, but today lets understand the difference between forged and cast along with the advantages and disadvantages of...
Request A Quote
Fill all information details to consult with us to get services from us
What are our quality inspection standards?
Our key qualities and services comprise of:
• Quality assured goods
• Multiple payment modes
• Experienced crew
• Prompt shipment
• Ethical business policies
• Wide distribution network
Which certifications have we acquired?
Lakshya International has the following certification:
• MSME UDHAYM NO
• GST CERTIFICATE
• CERTIFICATE OF INCORPORATION
• CERTIFICATE OF IMPORT EXPORT CODE
• ISO CERTIFICATE
• PED CERTIFICATE
• CE CERTIFICATE
• MANUFACTURING CERTIFICATE
How can I place an order?
To place an order and receive a quote you can visit us on our website